Your 68Hi anti hijack immobiliser is Microprocessor
controlled and offers effective protection against the
ever-increasing problem of vehicle hijacking.
The unit
installed has been designed to immobilise the vehicle
in a hijack situation while at the same time offering
you, the legitimate driver, maximum protection by delaying
the onset of the hijack routine and thus distancing yourself
from the hijacker.
Operation:
The hijack routine is initiated every time the ignition
is turned on, and every time the driver's door is opened.
After starting the vehicle, or opening the driver's
door, press the hidden cancel button. Failure to deactivate
the hijack will result in a series of audible warnings
and, if the hidden button is still not pressed, the immobiliser
will slow the vehicle down before stalling it. The indicators
will flash and the hooter will sound to attract attention
and convince the hijacker to abandon the vehicle. The
hooter will continue to sound for 90 seconds after the
vehicle has been stalled. For safety purposes the indicators
will flash until the hidden button is pressed.
If the
ignition is turned off after the audible warnings, and
prior to the immobiliser cutting the engine, the hooter
will sound; pressing the hijack cancel button will silence
the system. Even if the warning alerts a hijacker to
the existence of the anti hijack immobiliser there is
no way to silence the hooter while he searches for the
deactivating button.
The time between initiating hijack
and slowing the vehicle down can be programmed for 1,
2, or 3 minutes. Consult your Autowatch fitment centre
if you wish to alter the time selected.
It is also possible
to configure the immobiliser to delay the timer while
the engine is idling. When the vehicle is started, or
the door opened, the timer will only start after the
engine revs above a pre-set limit. Consult your fitment
centre for information on this option.
|
